Zirkonzahn announces its new M6 Teleskoper Blank Changer milling unit with blank changer function and Teleskoper Orbit ⌀ 125.
With the new M6 Teleskoper Blank Changer milling unit, Zirkonzahn automates processes, accelerates procedures and increases the productivity of the dental workflow. The five plus one axis simultaneous milling unit is equipped with a magazine for up to 16 blanks (upgradeable). As well as a Blank Changer that allows material blanks to be transferred autonomously from the magazine to the orbit.
Once the new structure is completed, the blanks are reinserted again in their correct place in the magazine. This means that restorations made of different dental materials, colours and heights can now be designed fully automatically without any manual intermediate steps. The wet and dry processing function permits the milling of all common soft and hard dental materials.
Features
The built-in Teleskoper Orbit SelfLock allows the processing of material blanks with a diameter of 95 mm, 98 mm, 106 mm and 125 mm. Thanks to special holders, also glass-ceramic blanks, Raw-Abutment blanks and zirconia blanks (size one) can be milled. In addition, the already known, innovative Teleskoper functions (adjustment of the friction, Double Milling, Stop & Go) can be used with this new milling unit.
Zirkonzahn equips the M6 Teleskoper Blank Changer milling unit with the new Performance Spindle by default. Thanks to a specially developed Permanent Magnet Synchronous Motor (PMSM) which is optimally adapted to the milling unit, this spindle can reach a maximum torque of 200 Ncm at speeds of 6.000 to 50.000 rpm with a peak power of 2.5 kW.
In addition, the milling unit is equipped with a contamination-protected tool chamber which is separate from the milling area as well as with an automatic compartment tool changer function. The two tool magazines with 30 slots each ensure a safe and tidy storage of up to 60 milling burs. The tools are automatically checked for type or damage before and after each milling process.
complete software, the new Detection Eye intraoral scanner, patient diagnostic tools and the new P4000 System for 3D printing. This is a pre-set package with printer, post-curing lamp, resins and software. You will also be able to attend Zirkonzahn’s lecture with DT Jacopo di Terlizzi (Zirkonzahn’s CAD/CAM expert and instructor).
For more information about the new milling unit, click here – M6 milling unit with blank changer function.
For more information about Zirkonzahn, visit www.zirkonzahn.com.
